Huawei CE5810-24T4S-EI Switch support 24-Port GE RJ45, 4-Port 10GE SFP+.
The Huawei Cloud Engine CE5800 series switches are next-generation, high-density Gigabit Ethernet switches designed for data centers and high-end campus networks. The hardware has an advanced architectural design with the industry’s highest density of GE access ports. The CE5800 is also the first Gigabit Ethernet access switch to provide 40 GE uplink ports.
Appearance of the CE5810-24T4S-EI
1
Power supply slot 1
Applicable power modules:
150 W AC power module (PAC-150WA)
350 W DC power module
2
Power supply slot 2
Applicable power modules:
150 W AC power module (PAC-150WA)
350 W DC power module
3
Fan slot 1
Applicable fan modules:
FAN-40SB series fan modules
4
Fan slot 2
Applicable fan modules:
FAN-40SB series fan modules
5
Console port
6
ETH management port (RJ45)
7
Barcode label
NOTE:
This label is drawable, and you can pull it outward to view the ESN barcode and MAC address of the switch.
Three port-side mounting holes for mounting brackets
12
Four power-supply-side mounting holes for mounting brackets
13
Ground screw
–
–
Ports on the CE5810-24T4S-EI
Attribute
Description
Connector type
RJ45
Standards compliance
IEEE802.3ab
Applicable cable
Straight-through cable and crossover cable
Working mode
Supported rate: 10/100/1000 Mbit/s auto-sensing
Full-duplex
Maximum transmission distance
100 m
Attribute
Description
Connector type
LC
Optical attributes
Depending on the module or cable in use
Standards compliance
IEEE802.3ae
Working mode
Supported rate: 1000 Mbit/s and 10 Gbit/s auto-sensing
Full-duplex
Technical specifications of the CE5810-24T4S-EI
Item
Description
Physical specifications
Dimensions (W x D x H): 442.0 mm x 420.0 mm x 43.6 mm (17.4 in. x 16.5 in. x 1.72 in.)
Weight (with two power modules and two fan modules, calculated based on the heaviest model if multiple models are supported): 8.0 kg (17.64 lb)
Environment parameters
Temperature
Operating temperature: 0°C to 40°C (32°F to 104°F) at altitude of 0-1800 m (0-5906 ft.)
NOTE:
When the altitude is 1800-5000 m (5096-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Storage temperature: -40°C to +70°C
Relative humidity
5% RH to 95% RH, noncondensing
Altitude
< 5000 m (16404 ft.)
Noise (sound pressure, 27°C)
Back-to-front airflow: < 43 dBA
Front-to-back airflow: < 47 dBA
Power specifications
Power source type
AC/DC
AC power input
Rated input voltage range: 100 V AC to 240 V AC, 50/60 Hz
Maximum input voltage range: 90 V AC to 290 V AC, 47 Hz to 63 Hz
DC power input
Rated voltage range: -48 V DC to -60 V DC
Maximum voltage range: -38.4 V DC to -72 V DC
High-voltage DC power input
Not supported
Rated input current
150 W AC power (PAC-150WA): 2.5 A (100 V AC to 240 V AC)
350 W DC power (PDC-350WA series): 11 A (-48 V DC to -60 V DC)
Chassis power consumption
Maximum power consumption
68 W
Typical power consumption
58 W (100% throughput, 3 m Ethernet cables on 24 ports, SFP+ cables on 4 ports, double power modules)
Chassis heat dissipation
Maximum heat dissipation
232 BTU/hr
Typical heat dissipation
198 BTU/hr (100% throughput, 3 m Ethernet cables on 24 ports, SFP+ cables on 4 ports, double power modules)
Surge protection
Ethernet electrical ports: 2 kV in common mode
Power module:
AC: 6 kV in common mode and 6 kV in differential mode
DC: 4 kV in common mode and 2 kV in differential mode
Heat dissipation
Heat dissipation mode
Air cooling
Airflow
Front-to-back or back-to-front, depending on the fan modules and power modules
Reliability and availability
Power module backup
1+1 backup
Fan module backup
1+1 backup
Hot swap
Supported by all power modules and fan modules
Mean time between failures (MTBF)
70.3 years
Mean time to repair (MTTR)
1.75 hours
Availability
0.9999971525
Technical specifications
Processor
1.2 GHz, dual-core
DRAM Memory
2 GB
NOR Flash
16 MB
NAND Flash
512 MB
Stack
Service port supporting the stack function
10GE optical ports
Certification
Safety standards compliance
EMC standards compliance
Environmental standards compliance
CE5810-24T4S-EI FAQ
Q1: Are both the Ethernet and optical ports backward compatible with 1G devices? Is no additional configuration required?
A1: Both the 24 10GE Ethernet ports and 4 10GE optical ports support automatic 10G/1G speed adaptation. No manual configuration is required. They can directly connect to older 1G printers, cameras, servers, and other devices, offering excellent compatibility.
Q2: Is the bandwidth of the 4 10GE optical ports sufficient for the uplink needs of small and micro enterprises?
A2: The total uplink bandwidth of 40Gbps fully meets the uplink needs of core and branch offices of small and micro enterprises. With redundant link design, there are no bandwidth bottlenecks, supporting high-concurrency services.
Q3: What is the necessity of optional dual power supplies? Do small and micro enterprises need to configure them?
A3: A single power supply meets regular business needs; for critical scenarios requiring 24-hour continuous operation (such as POS systems and medical data storage), dual power supplies are recommended to enhance redundancy.
Optical Modules Supported by Huawei S Series Switches