The S series fixed Ethernet switches integrate the access and transmission functions to provide reliable access/aggregation and high-quality transmission of services on enterprise networks. The switches are built on an integrated hardware platform, and their hardware system consists of the chassis, power module, fan module, extended cards, and Switch Control Unit (SCU).
The S series fixed Ethernet switches are available in a variety of models for you to choose based on your network requirements.
S6700 Series Switches Characteristics The S6700 series Ethernet switches are next-generation 10G fixed switches. The S6700 can function as a core switch on a campus network. The S6700 has industry-leading performance and provides line-speed 10GE access ports and line-speed 40GE even 100GE uplink ports. It can function as a core switch on a campus network to provide 40 Gbit/s even 100 Gbit/s traffic aggregation.
The Huawei S6720-32X-LI-32S-AC is a high-performance, cost-effective pure optical 10GbE switch in the Huawei S6720-LI series. Its core advantage is "all-optical high-density, high-bandwidth networking for small and medium-sized scenarios"—32 10G optical ports adapt to 4000-6000 terminals, pure optical design with no electrical ports, focusing on all-optical access needs; total switching capacity ≥798Gbps, forwarding performance up to 288Mpps; retains core enterprise-level functions such as link aggregation, VRRP redundancy, and basic QoS, while eliminating redundant advanced functions, and features built-in 9KV surge protection + hardware stability architecture, with an annual failure rate of <0.03%. It is the preferred choice for small and medium-sized enterprises seeking all-optical networking and high-density optical port access that balances bandwidth, stability, and cost.
S6720-32X-LI-32S-AC FAQ
Q1: What are the core differences between this and the S6720-26Q-LI-24S-AC (24 optical + 2×40G) in the same series?
A1: The former is a 32-port pure optical model with higher optical port density and no electrical ports, focusing on all-optical scenarios; the latter includes two 40G uplink ports, emphasizing high-speed uplinks and suitable for hybrid optical-electrical networks. Both have the same core stability.
Q2: Will simultaneously connecting 10G optical port devices to the 32 ports cause bandwidth bottlenecks?
A2: No, the total switching capacity is ≥798Gbps, and the forwarding performance reaches 288Mpps. Combined with core layer link aggregation, it can easily handle 6000 concurrent terminal transmissions without lag or packet loss.
Q3: Is a pure optical port switch necessary for small and medium-sized enterprises?
A3: All-optical networking is the future trend. Pure optical port equipment can avoid the cost and failure points of photoelectric conversion, and has a longer transmission distance to adapt to deployment between campus buildings. The 32-port high-density design reserves room for business growth.
S6720-32X-LI-32S-AC Appearance
1
Thirty-two 10GE SFP+ ports
Applicable modules and cables:
GE optical module
GE-CWDM optical module
GE-DWDM optical module
GE copper module (100M/1000M auto-sensing)
10GE SFP+ optical module (OSXD22N00 not supported)
10GE-CWDM optical module
10GE-DWDM optical module
1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables
3 m and 10 m SFP+ AOC cables
0.5 m and 1.5 m SFP+ dedicated stack copper cables (the last 16 ports are supported, used for zero-configuration stacking, supported in V200R011C10 and later versions)
2
One PNP button
NOTICE:
Applicable in V200R012C00 and later versions:
To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.
To reset the switch, press the button.
Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.
3
One ETH management port
4
One console port
5
One USB port
6
Ground screw
NOTE:
It is used with a ground cable.
7
RPS socket
NOTE:
It is used with an RPS cable, which is not hot swappable.
8
Jack for AC power cable locking strap
NOTE:
The AC power cable locking strap is not delivered with the switch.
9
AC socket
NOTE:
It is used with an AC power cable.
-
-
S6720-32X-LI-32S-AC Port Description
10GE SFP+ port
Attribute
Description
Connector type
LC/PC
Optical port attributes
Depend on the optical module used
Standards compliance
IEEE802.3ae
Working mode
GE/10GE auto-sensing
Technical specifications of the S6720-32X-LI-32S-AC
Item
Description
Memory (RAM)
1 GB
Flash
512 MB in total. To view the available flash memory size, run the display version command.
Mean time between failures (MTBF)
42.8 years
Mean time to repair (MTTR)
2 hours
Availability
> 0.99999
Service port surge protection
NA
Power supply surge protection
±6 kV in differential mode, ± 6 kV in common mode
Dimensions (H x W x D)
Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 225.0 mm (1.72 in. x 17.4 in. x 8.86 in.)
Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 234.4 mm (1.72 in. x 17.4 in. x 9.23 in.)
Weight (including package)
4.3 kg (9.48 lb)
Stack ports
Any 10GE SFP+ ports (a maximum of 16 physical ports)
RTC
Supported
RPS
Supported
PoE
Not supported
Rated voltage range
100 V AC to 240 V AC, 50/60 Hz
Maximum voltage range
90 V AC to 264 V AC, 47 Hz to 63 Hz
Maximum power consumption (100% throughput, full speed of fans)
108.5 W
Typical power consumption (30% of traffic load, tested according to ATIS standard)
71.8 W
Operating temperature
0°C to 45°C (32°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.)
NOTE:
When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Short-term operating temperature
-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5906 ft.)
NOTE:
When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
The equipment can operate beyond the normal operating temperature range for a short-term period, but the following conditions must be met:
The equipment operates at a temperature of over 45°C (113°F) consecutively for at most 96 hours in one year.
The equipment operates at a temperature of over 45°C (113°F) for a total of no more than 360 hours in one year.
The equipment operates at a temperature of over 45°C (113°F) for no more in 15 times in one year.
The equipment may be damaged or experience unexpected exceptions if any of the preceding limits is exceeded.
The equipment cannot start when the temperature is lower than 0°C (32°F). The maximum distance of optical modules used in these conditions cannot exceed 10 km.
Storage temperature
-40°C to +70°C (-40°F to +158°F)
Noise under normal temperature (27°C, sound power)
< 46.4 dB(A)
Relative humidity
5% to 95%, noncondensing
Operating altitude
0-5000 m (0-16404 ft.)
Certification
EMC certification
Safety certification
Manufacturing certification
Part number
98010693
Optical Modules Supported by Huawei S Series Switches